Manitowoc mobile cranes           011 323 9600


Capacity 120 t Capacity
Main Boom Length 12,8 m - 48,7 m Main Boom Length
Max Tip Height 85 m Max Height
Vehicle Gross Weight 78811.6 kg Gross Weight
Get a QuoteSpecifications
Boom12,8 m - 48,8 m, five section, sequenced synchronized full power boom. Maximum tip height: 51,5 m.
Bifold swingaway extension11,0 m - 18,0 m offsetable bifold lattice swingaway extension. Offsets 0°,20° and 40°. Stows alongside base boom section. Maximum tip height: 69,2 m.
*Lattice Swingaway inserts2 x 8 m lattice extension inserts. Installs between the boom nose and bifold extension, non-stowable. Maximum tip height: 85,0 m.
Boom elevationOne double acting hydraulic cylinder with integral holding valve provides elevation from -3° to +78°.
Load moment and anti-two block systemStandard "Graphic Display" load moment and anti-two block system with audiovisual warning and control lever lockout. These systems provide electronic display of boom angle, length, radius, tip height, relative load moment, maximum permissible load, load indication and warning of impending two-block condition. The standard Work Area Definition System allows the operator to pre-select and define safe working areas. If the crane approaches the pre-set limits, audio-visual warnings aid the operator in avoiding job-site obstructions.
CabFull-vision, all-steel fabricated with acoustical lining and tinted safety glass throughout. Cab tilts to +20 degrees. Deluxe seat incorporates armrest-mounted hydraulic single-axis controllers. Dash panel incorporates gauges for all engine functions. Other standard features include: hot water heater, cab circulating air fan, air conditioning, sliding side and rear windows, sliding skylight with electric wiper and sunscreen, electric windshield wash/wipe, fire extinguisher and seat belt.
SlewingTwo speed, planetary swing drive with foot applied multi-disc wet brake. Spring applied, hydraulically released swing brake. 360° positive swing lock and two position mechanical house lock, both operated from cab. Maximum speed: 2,5 RPM.
Counterweight18 144 kg. Hydraulically installed and removed.
Hydraulic systemSix main pumps with a combined capacity of 776 LPM. Maximum operating pressure: 331 bar. Two individual post pressure compensated valve banks. Return line type filter with full flow by-pass protection and service indicator. Replaceable cartridge with micron filtration rating of 5/12/16. 1230 L hyd. reservoir. Remote mounted oil cooler with thermostatically controlled hydraulic driven motor, fan/air to oil. System pressure test ports.
HoistPlanetary reduction with automatic spring applied multi-disc wet brake. Grooved drum. Electronic hoist drum rotation indicators, and hoist drum cable followers. Maximum single line pull:
• 1st layer: 8 740 kg.
• 3rd layer: 7 432 kg.
• 5th layer: 6 464 kg. Maximum Permissible Line Pull: 7 620 kg with 6X37 class rope. 7 620 kg. with 35X7 Rotation Resistant rope. Maximum Single Line Speed: 171 m/min. Rope Construction: 6X36 EIPS IWRC, Special Flexible 35x7 Flex-X, Rotation Resistant Rope Diameter: 19mm. Rope Length: Main Hoist: 290 m - Auxiliary Hoist: 213 m. Maximum Rope Stowage: 368 m.
CraneSTARCrane asset management system.
Carrier frameBox section frame fabricated from high-strength, low alloy steel. Removable outrigger housings, front/rear towing and tie down lugs.
OutriggersFour hydraulic telescoping single-stage double box beam outriggers with inverted jacks and integral holding valves. Three position setting, 0%, 50% and fully extended. Outrigger boxes removable for ease of transportation. All steel fabricated, quick release type outrigger floats, 775 mm diameter. Maximum outrigger pad load: 75 298 kg. Controls and crane level indicator located in cab
EngineTier 3 / Euromot 3A: Cummins QSC 8.3L diesel, six cylinders, 224 kW at 2200 rpm. Maximum torque: 1356 Nm at 1600 rpm. Note: Required for sale outside of North America and European Union countries. Tier 4f / Euromot 4: Cummins QSL 8.3L diesel, six-cylinder, turbo charged with Cummins diesel particulate exhaust filter/muffler. Meets U.S. E.P.A. Tier IV and E.U. Stage IIIB. 239 kW at 2200 rpm. Maximum torque: 1383 Nm at 1500 rpm. Fuel requirements: Maximum of 15 PPM sulphur content (Ultra Low Diesel Fuel) Note: Tier IV engine required in North America and European Union countries. Fuel tank capacity: 379 l.
TransmissionSequential powershift with 6 forward and 3 reverse speeds. Front axle disconnect for 4 x 2 travel.
Drive/Steer4 x 4. Fully independent power steering: Front: Full hydraulic steering wheel controlled. Rear: Full hydraulic switch controlled. Provides infinite variations of 4 main steering modes: front only, rear only, crab and coordinated. Rear steer indicator.
AxlesFront: Drive/steer with differential and planetary reduction hubs rigid mounted to frame. Rear: Drive/steer with differential and planetary reduction hubs pivot mounted to frame.
TyresStd. 33,25 X 29 - 38 bias ply, Titan.
BrakesFull hydraulic split circuit operating on all wheels. Spring-applied, hydraulically released parking brake mounted on front axle.
LightsFull lighting including turn indicators, head, tail, brake and hazard warning lights.
Maximum speed24 km/h.
Gradeability (theoretical)73% Based on 79 460 kg GVW, 33.25 x 29 tires, pumps engaged, 48,8 m boom, plus 18 m swingaway, 18 144 kg counterweight, hookblock and headache ball.
Electrical systemTwo 12 V - maintenance free batteries. 12 V starting and lighting, circuit breakers.
* Optional equipmentAuxiliary lighting package (includes cab mounted amber flashing light, hoist mounted work light, single base boom mounted floodlights and rubber mat for stowage trough).
• Rear Pintle Hook
• Cab controlled cross axle differential locks, (front and rear)
• PAT event recorder down load kit
• Wind speed indicator (wireless)
• Hydraulic bi-fold swingaway
• Boom extension inserts
• CE mark conformance