Manitowoc mobile cranes
  sales@craneloadtech.co.za           011 323 9600

KEY SPECIFICATIONS

TYPE VALUE
Capacity 22 t Capacity
Main Boom Length 7,2 m - 21,6 m Main Boom Length
Max Tip Height 29 m Max Height
Vehicle Gross Weight 20622.6 kg Gross Weight
Get a QuoteSpecifications
TECHNICAL
FEATURE DESCRIPTION
Boom7,21 m - 21,6 m (23 ft 8 in - 71 ft) full power main boom. Four-section boom with three (3) powered sections. Maximum tip height: 24,0 m (79 ft).
*Optional swingaway extension*5,1 m (17 ft) offsettable swingaway extension. Offsets 0°, 15° and 30° via pivoting boom nose. Stows alongside base boom section. Maximum tip height: 28,9 m (95 ft).
Boom noseTwo nickel plated steel sheaves mounted on heavy-duty tapered roller bearings with removable pin-type rope guards. Quick reeve type boom nose with four-position (0°, +30°, +60°, and + 80°) pivoting to minimize head height requirements. Lowers head height by 0,6 m (2 ft).
Boom elevationTwo double acting hydraulic cylinders with integral holding valves provides elevation from -0° to +80°.
Anti-two block deviceStandard anti-two block device, which, when activated, provides an audible warning to the operator and "locks-out" all functions whose movement can cause two-blocking.
Rated Capacity Limiter (RCL)Black and white, graphical display of boom angle, boom length, boom radius, rated load, and calculated load. Allows for operator inputs to set the crane configuration. RCL system is hardwired and calculates load via pressure transducers in the lift cylinder. Display includes a color-coded light bar and audible alarm with function cut-out if load exceeds the load chart parameters.
SwingBall bearing swing circle with 360° continuous rotation. Hydraulic motor driven pinion with brake. Maximum speed: 2,5 rpm
Hydraulic systemOne pressure compensated variable displacement axial piston pump with load sensing. Maximum output of: 208 lpm (55 gpm). Maximum operating pressure: 241 bars (3500 psi). Four-section valve bank, chassis mounted, operated via dash mounted, hydraulic pilot controls. 208 L (55 gal) hydraulic reservoir with sight level gauge and steel side plating to guard against side impacts. 5 micron return line filter with full flow by-pass protection and service indicator.
Hoist specificationsPiston motor driven with automatic spring-applied / hydraulically released wet brake. Drum rotation indicator in the hoist joystick control and hoist direction indicator light on dashboard. Maximum hoist pull (first layer): 6804 kg (15,000 lb) Maximum permissible single line pull: 5670 kg (12,500 lb) (3.5:1 design factor) Maximum single line speed: 61 m/min (200 fpm) Rope construction: 6X19 XIPS/IWRC Rope diameter: 16 mm (5/8 in) Rope length: Main hoist: 119 m (390 ft) Maximum rope stowage: Main hoist: 151 m (495 ft)
ChassisHigh-strength alloy frame constructed with integral outrigger housings; front and rear lifting, tie-down, and towing lugs. 60 ft² carrydeck size with 13 608 kg (30,000 lb) deck only carrying capacity. Deck coated with anti-skid treatment.
OutriggersHydraulic telescoping beam with vertical jack at the four corners provides extended and down and retracted and down lifting capacities. Integral holding valves on the jack cylinders. Outrigger pad size: 29,2 cm x 29,2 cm (11.5 in x 11.5 in) Maximum outrigger pad load: 18 825 kg (41,500 lb) / 339 p.s.i.
Outrigger controlsIndependent outrigger control rocker switches for beam or jack selection with separate extend/retract rocker switch. 360° bubble level located inside cab.
Engine (EPA Tier 3)Cummins QSB 4,5L, four cylinder / turbo-charged diesel rated at 97 kW (130 bhp) (gross) at 2500 rpm. Standard 110 V engine block heater and cold weather intake grid heater. Engine hour meter located inside operators compartment. Maximum gross torque: 622 N-m (459 ft lb) at 1500 rpm. Note: Required for sale outside of North American and European Union countries. Fuel requirements: Maximum of 5000 ppm. Sulfur diesel fuel.
Fuel tank capacity189 L (50 gal) DEF (diesel exhaust fluid): 19 L (5 gal)
TransmissionPowershift with four speeds forward and three speeds reverse. Stalk mounted direction shifter with rotary gear selection.
Operators control stationFrame mounted, open air style control station with cab shell includes all crane functions, driving controls, and overhead safety glass. Other standard equipment includes a suspension seat with seat belt, hour meter, sight level bubble, and 1,1 kg (2.5 lb) fire extinguisher. The dash panel includes a multi-cluster gauge showing fuel, water temperature, DEF gauge, battery voltage and engine fault codes. An engine monitoring indicator lamp shows engine warning, stop engine, wait to start, transmission high temperature, low brake system pressure, hydraulic oil temperature and DEF status indicators. The RCL display is mounted to the top of the front dash.
*Operators control station enclosedIncludes the standard cab shell with the addition of front, rear, and right side glass, a split (2 piece) hinged door with sliding glass, front windshield wiper and washer, hot water heater and defroster with fan and cab dome light are included.
Electrical systemTwo 12 V maintenance-free batteries, 730 CCA each at 0°. 130 amp alternator.
DriveTwo wheel (rear drive) or four wheel selection, front and rear axle drive with planetary hubs and limited slip differential.
SteeringStandard three steering modes. Front two-wheel, four-wheel coordinated, and four-wheel crab steer with electronic self alignment, three-position rocker selector on dash panel. Outside turning radius: Two-wheel steer: 7,32 m (24 ft) Four-wheel steer: 4,04 m (13 ft 3 in)
AxlesFront: Drive/steer with differential and planetary reduction hubs, axle is rigid mounted to frame. Rear: Drive/steer with differential and planetary reduction hubs, axle is pivot mounted to frame allows up to 3.5° of oscillation.
Oscillation lockoutsManual switch to engage and disengage the rear axle lockouts. Engage when lifting on rubber and in crab steer mode, disengage to allow oscillation when traveling over rough terrain.
BrakesHydraulic actuated internal wet-disc service brake acting on all four wheels. Dash mounted toggle switch with light for activating or release of the dry disc parking brake mounted on the transmission output yoke.
TiresStandard: 17.5 x 25 bias Optional: 17.5R25 radials
LightFull lighting including turn indicators, head, tail, brake and hazard warning lights recessed mounted.
Maximum speed31,22 km/h (19.4 mph)
Gradeability (theoretical)63%...... (at engine stall) no load 38%......(at engine stall) with 13 608 kg (30,000 lb) deck load
Gross vehicle weight (GVW)Open cab: 20 623 kg (45,465 lb) Enclosed cab: 20 729 kg (45,698 lb)
Miscellaneous standard equipment
• 22 t (25 USt) two-sheave "painted block" hook block, with "quick reeve."
• Back-up motion alarm
• Outrigger motion alarm
• Dual rear-view mirrors
• Hoist drum rotation indicator
*Optional equipment
• Auxiliary lighting: includes amber strobe light and boom mounted work lights
• Convenience package: includes front and rear pintle hitch and headlight/ taillight grille covers
• Enclosed cab package: includes heater and defroster, cab dome light, all window glass, and two-piece split door
• Offsetable swing away boom extension with hook and ball
• Air conditioner
• Wire rope third wrap indicator with hoist function cut-out
• 3629 kg (8000 lb) below-deck mounted tow winch
• Foam-filled tires
• RCL system includes a full color graphical display, work area definition (WADS), and is datalogger capable with activation
• K-100™ synthetic rope
• Below-deck winch